Balancing those chemical levels. A little goes a long way
Swimming Pool Start Up, the right way to enjoy new pool, spa.
After your new pool has completed the system start-up phase – which takes about 30 days – most pool companies recommend that you run your pool approximately 6 – 8 hours per day. However, in the summer time, you can split those hours and run your pool approximately 3-4 hours in the morning and the same in the evening. This allows the pool to stay clean while maintaining the chemical level.
Balancing the chemical levels in your swimming pool or spa
To ensure that your pool stays balanced, you should always test the Chlorine, pH, Alkalinity & Hardness levels of your pool. After 30 day start-up period, you can test the water with a home kit or go visit your local pool supply company. They will test your water and give you a printed report with your results and their recommendations of chemicals that you need to add. This can make it a lot easier to maintain a schedule of chemical maintenance. As a heads-up, Saturday mornings are normally the busiest time so if you don’t want to wait in line, you might want to test on a different day.
Check the swimming pool filter and the lines
If you have completed all of the chemical testing, but you are experiencing weird spikes or occasional issues with the water, check your lines and your filter. If the filter is dirty or there is a clog in your line, the chemicals are unable to properly circulate which can cause issues. As a rule of thumb, if you operate an automatic pool cleaner, make sure you clean the filter at least once a week.
Don’t Panic about the Pressure
We recently received a question regarding the water pressure. When your pool starts the daily cycle, it takes a few minutes to come up to full pressure. This is normal and nothing to fret over. When your motor is turned off, there is nothing to make the water circulate and it will take a few minutes for the motor to come up to speed.